Liquid error: Could not find asset snippets/breadcrumb.liquid

Ping Glide 3.0 Wedge Mens Right Hand

  • €159.00

To Avail of the best quality, service and price! Please contact one of our sales team for more information 09064 33616 OR 0877006587 or email us: sales@progolf.ie


Due to PING Internet Trading Policy we are unable to sell Ping Hardware on-line. For more information and to purchase this product please contact our store for any other information

 


  • Feel, Forgiveness

    A larger, softer elastomer Custom Tuning Port insert covers more of the back of the face, activating at impact to produce a soft yet solid feel. The new cavity design and larger CTP expand the perimeter weighting to increase the MOI and position the center of gravity higher to yield lower-launching, higher-spinning trajectories for more control.
  • Precision-Milled Grooves

    Patented wheel-cut grooves have a sharper edge radius to increase interaction with the ball at impact, creating more friction for improved spin and trajectory control. The higher-lofted versions (54°, 56°, 58° & 60°) feature an extra ½ groove at the bottom of the face to impart more spin, especially around the greens.
  • address view of Glide 3.0 wedge with 56 degree SS sole

    Players-Style Look

    The Glide 3.0 wedge blends a players-style look with game-improvement technology. At address, it presents the clean appearance of a tour-style wedge. Offset was added based on tour player feedback to provide a more captured look.
  • Classic, Proven Performer

    The Eye2’s iconic design has been helping golfers get out of the sand and tough spots and saving them strokes for decades. Its pioneering high toe and exacting geometries are engineered to ensure consistency and improve your short-game performance.
  • Eye2 Sole Grind

    This grind matches founder Karsten Solheim’s original groundbreaking Eye2 SW sole and face profile, offering a narrow hosel transition and progressive lead edge for the ultimate in bunker performance and touch shots around the green.
  • Standard Sole (SS) Grind

    This mid-bounce sole with heel relief will fit most golfers. Engineered for players with a moderate angle of attack. Provides exceptional performance in a variety of turf and sand conditions.
  • Wide Sole (WS) Grind

    The most forgiving sole through the ground as it is round and cambered with significant bounce. Recommended if you have a steep angle of attack and you typically play in soft turf and sand conditions.
  • Thin Sole (TS) Grind

    The thin-sole grind facilitates precise shot-making and versatility from tight lies. Features extreme heel relief with a PING WRX-inspired bounce grind, making it ideal for firm conditions and a shallow angle of attack.
  • Full Shots

    The grooves in the lower-lofted wedges (46°, 50° & 52°) are milled with a 20° sidewall and a .005" edge radius for optimal full-shot performance.
  • Around the Green

    The higher-lofted versions (54°, 56°, 58° & 60°) are milled to a .004" edge radius with a 28° sidewall to impart more spin, especially around the greens.
  • Lighter, More Control

    The Glide 3.0 wedge’s grip and shaft are lighter, contributing to an overall weight reduction for the entire club. The Dyla-wedge Lite grip is ¾-inch longer than a traditional grip with reduced taper, allowing you to choke down for more versatility and trajectory control. The PING Z-Z115 wedge shaft is made by Nippon and custom engineered with a lower balance point closer to the tip to provide lower launch with more control and enhanced feel.
    Glide 3.0
    Specifications
    CLUB LOFT LENGTH LIE ANGLE OFFSET EFFECTIVE BOUNCE SWINGWEIGHT
    46/SS 46.0°degrees 35 1/2"1/2 64.1°degrees 0.09"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
    50/SS 50.0°degrees 35 1/2"1/2 64.1°degrees 0.08"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
    52/SS 52.0°degrees 35 1/2"1/2 64.1°degrees 0.08"Ping.Clubs.Specs.Offset.Units 12.0°degrees D2
    54/SS 54.0°degrees 35 1/4"1/4 64.4°degrees 0.08"Ping.Clubs.Specs.Offset.Units 12.0°degrees D3
    54/Eye2 54.0°degrees 35 1/4"1/4 64.4°degrees 0.10"Ping.Clubs.Specs.Offset.Units 10.0°degrees D3
    54/WS 54.0°degrees 35 1/4"1/4 64.4°degrees 0.08"Ping.Clubs.Specs.Offset.Units 14.0°degrees D3
    56/SS 56.0°degrees 35 1/4"1/4 64.4°degrees 0.08"Ping.Clubs.Specs.Offset.Units 12.0°degrees D3
    56/WS 56.0°degrees 35 1/4"1/4 64.4°degrees 0.08"Ping.Clubs.Specs.Offset.Units 14.0°degrees D3
    56/Eye2 56.0°degrees 35 1/4"1/4 64.4°degrees 0.10"Ping.Clubs.Specs.Offset.Units 10.0°degrees D3
    58/SS 58.0°degrees 35" 64.6°degrees 0.07"Ping.Clubs.Specs.Offset.Units 10.0°degrees D4
    58/TS 58.0°degrees 35" 64.6°degrees 0.07"Ping.Clubs.Specs.Offset.Units 6.0°degrees D4
    58/WS 58.0°degrees 35" 64.6°degrees 0.08"Ping.Clubs.Specs.Offset.Units 14.0°degrees D4
    58/Eye2 58.0°degrees 35" 64.6°degrees 0.10"Ping.Clubs.Specs.Offset.Units 8.0°degrees D4
    60/SS 60.0°degrees 35" 64.6°degrees 0.07"Ping.Clubs.Specs.Offset.Units 10.0°degrees D4
    60/TS 60.0°degrees 35" 64.6°degrees 0.07"Ping.Clubs.Specs.Offset.Units 6.0°degrees D4
    60/WS 60.0°degrees 35" 64.6°degrees 0.08"Ping.Clubs.Specs.Offset.Units 14.0°degrees D4
    60/Eye2 60.0°degrees 35" 64.6°degrees 0.10"Ping.Clubs.Specs.Offset.Units 8.0°degrees D4